Click on the desired product.
● Pneumatic Screwing Body ● Double Action Cylinder ● Strength aluminum body ● Anodised body for corrosion Resistance. ● Hard chrom plated rod. ● Parts of mechanism are made of hardened ateel and coated black. ● Note : Air Unit (filter and lubricant) shall be used (6bar inlet pressure). It is essential to use flow control in way of air inlet & outlet because of avoiding clamp knocking ● Stroke _ In both type of clamping(R&L type),25% of clamp moving is linearly in direction of Y axis and then it turns 90 ° into its position ● Air Consumption _ Air Consumption per cycle. * See top view for selecting the rotate direction.
Layout:
- Mounting with Slotted Round Nut.
Example:
Point:
Mounting of swing lever
1- Setup swing lever with bolt on the piston rod.
2- Turn swing lever into the position.
3- Fix piston’s rod with wrench and tighten bolt.
Swing lever removal
1- Hold piston’s rod with wrench and loosen the bolt.
2- As the following pictures, seperate swing lever from piston ‘s rod with light hit by the plastic hammer at the bottom of swing lever.
3- Replacing non-standard lever with standard lever leads to seriouse damage to the swing clamp.
reviews.write.description
ورود شما به معنای پذیرش شرایط فارا و قوانین حریمخصوصی است.
فارسی
English
русский
سامانه تامین آنلاین کالا فارا